Motorized Positioners and Controllers (900)
Motorized positioners & controllers include: motorized mirror mounts, motorized vertical and horizontal translation stages, motorized delay line, motorized rotation stages, motorized goniometers, motorized screws & actuators, narrow motorized translation stages with DC motors, controller cards and software.
/Precise 870-0010 and Micrometer 870-0020 Screws/870-0010-20_img.jpg)
The Motorized Mirror Mounts are designed for precise angular alignment of optical elements. A platform is tilted about two axes. A retaining ring keeps optics in a non-through mounting opening of the platform. The ring is fixed by 3 screws
/Fine Closed Screw 870-0030/870-0030_omg.jpg)
1'', 2'', 3'' optics mounts, tilt travel range 9° (about two axes), travel range 4 mm, mounting on either of 2 sides, two models - round and square aperture and clear edge design.
/Micrometer Screws 870-0040/870-0040_img.jpg)
1'' optics mount; limit switch: optoelectronic couple; designed to use with microscope; black anodized aluminium.
/Thin Micrometers 870-0045/photo_870-0045.jpg)
The Vacuum Compatible Motorized Vertical Drive Mirror Mounts with DC motor are designed to minimize mount-induced wavefront distortions. In conventional mounts, a side screw tightens the mirror.
/High-Resolution Micrometers 870-0050, 870-0050-02/870-0050_img_xxx.jpg)
The Motorized Gimbal Mount with angular range ±2,5°, resolution 0,156 μm and a clear aperture of 23 mm. Two Compact Motorized Actuators 970-0060 are installed.
/Mini Micrometers 870-0055/870-0055_img.jpg)
This Motorized Vertical Translation Stage boasts our unique design. Being very compact, it provides smooth and stable adjustment of height. It has a large travel range and supports large loads.
